The PCE-CT 5000 Coating Thickness Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Coating Thickness Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings. The Coating Thickness Gauge belongs to the basic equipment for each production, workshop or general quality control systems in order to control the materials at the input and output or even to show the previous paint repairs carried out on the car. Due to its compact design, it is easy to handle the device and there is a possibility of a simple one-button operation. There is also no need to set a complicated measuring mode for the individual measurements. This device automatically detects the basic surface and sets the corresponding mode. The Coating Thickness Gauge is designed and suitable for measurements of non-magnetic coatings such as varnishes, plastics, chrome, copper, zinc, enamel, etc. on steel and iron and all insulating coatings such as varnishes, plastics, enamel, paper, glass, rubber, etc. on copper, aluminum, brass and stainless steel as well as anodized aluminum.
- Measures on iron and non-ferrous metals
- Ready to measure at once
- High measuring range up to 5 mm / 0.2 in
- With different calibration standards
- Single and interval measurement
- Ergonomic one-hand operation
- Complete equipment with a battery
- Supplied with storage case
Specifications
Ferrous metals (Fe) | magnetic induction |
Non-ferrous metals (NFe) | eddy current |
Measuring range | 0 µm ... 5000 µm / 0 mils ... 196.8 mils |
Accuracy | ±2 % or 2.5 µm / 0.1 mils (the highest value is valid) |
Resolution | 0.1 µm (0.0 µm ... 99.9 µm) / 0.004 mils (0.0 mils ... 4.0 mils) 1 µm (100 µm ... 5000 µm) / 0.04 mils (4.0 mils ... 200 mils) |
Smallest measuring surface | Ø 6 mm / Ø 0.24 in |
Smallest radius of curvature | convex. 5 mm / 0.2 in concave: 60 mm / 2.4 in |
Minimum thickness of the base material | 0.3 mm / 0.01 in (for Fe-measurement) 0.5 mm / 0.02 in (for NFe-measurement) |
Measurement modes | single and interval measurement |
Units | µm, mils |
Display lighting | Yes |
Environmental conditions | 0° C ... +50 ° C / 32° F ... 122° F < 80% RH |
Power supply | 1.5 V AAA batteries |
Device dimension | 129 mm x 69 mm x 27 mm 5.1 in x 2.7 in x 1.1 in |
Weight | 130 g / 0.3 lbs including batteries |
Delivery Scope
1 x PCE-CT 5000 Coating Thickness Gauge with integrated probe
1 x storage case
2 x 1.5 V AAA battery
1 x set of calibration standards
1 x user manual